Tensile solder sleeve wire splices
- BrandDEEM
- TypeDC-SR
Applications
One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder.
Provides insulation, inspection, strain relief and waterproof. Makes insulation easy and lowers the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, it's very convenience to use the exact wire dimension.
Features
Shrinkage ratio 3:1
Waterproof for wiring splices
Easy control soldering process
High tensile strength
Transparent sleeve provides precise inspection
Operating temperature:
Working temperature: - 55°C~125°C
Minimum shrink temperature: 80°C
Starting temperature of solder melt: 138°C
Temperature of fully solder melt: 160°C
Technical data
Item
Typical data
MAX operating Temperature
-55℃~+125℃
Shrink temperature
>115℃
Dielectric strength
1KV
Protection type
IP67
Solder
TYPE Sn42Bi58 per ANSI/J-STD-006
Flux
TYPE ROMI per ANSI/J-STD-004
Dimensions
Part No
Product dimensions(mm)
Wire Dimensions(mm)
Cable Size
A(min)
L(min)
B(min)
B and C(max)
C(min)
A.W.G(mm2)
SR01
Clear
1.7
26
1.0
1.7
0.76
26-24(0.25-0.34)
SR02
Red
2.7
40
1.4
2.7
1.2
22-18(0.5-1.0)
SR03
Blue
4.5
40
2.3
4.5
2.0
16-14(1.5-2.5)
SR04
Yellow
6.0
40
3.7
6.0
3.4
12-10(4.0-6.0)
